Lietuvių English Russian

Contacts

We are ready to 
answer Your questions!

Tel. +370 644 77707
Get special offer.
 

Floating Mini Excavators

Floating Mini Excavators Floating Mini Excavators Floating Mini Excavators Floating Mini Excavators
Description:

Unfortunately our ponds overgrow with reeds, algae and other vegetarion, water flows slower and slower. The botton is covered with sludge, that creates not pleasent feeling for the feet.
Multifunctional cleaning plant - floating mini excavator dumper FED was created in such reality. This plant can change the situation in ponds, can change it beyond recognition with no hurt for ecosystem.

Our floating plant has some advantages - small size and high mobility. This alllows to perform cleaning, construction, mounting and transportation works in such places similar plants cannot do, or such works are extremely expensive. FED's unique constructive characteristics make earlier impossible works - possible. 

One of the most important factor is - not high price of plant, low maintenance cost. This garantees high index of ROI - return of investment.

Floating mini excavator dumper FED consists of three section pontoon, with mounted mini excavator and dumper.

Mini excavator rotates around its axis, that allows unimpeded loading of extracted from under the water mass to it's own body, to the shore or other needed location.

At this moment we can offer two models of effective floating mini excavator dumper: FED25 and FED50.
Model FED25 digging depth is 2,2m and loading capacity is 2500 kg.
Model FED50 digging depth is 3,1m and loading capacity is 5000 kg.

Our floating plant is multifunctional. It is possible to use different attachments depending of works are needed to do:

  • digging bucket
  • planning bucket
  • rake for water plants and gaрbage 
  • hammer and other

Works and tasks

Floating excavator dumper can do the following works:

  • reed with roots cleaning
  • gold mining industry
  • dredging
  • islands and coastal terraces creation
  • digging of trenchs and canals in marshe areas
  • digging of trenchs and canals under the water
  • removal of trees and debris from under the water
  • sludge and roots cleaning
  • extraction of minerals from under the water
  • shore slopes planning
  • shore slopes planning works from the water surface
  • sheet support installation works from the water surface
  • creation of dams
  • transportation of pulled from under the water mass to the point of unloading
  • construction material transportation and unloading in rivers and lakes

 

Advantages

  • high index of ROI - return of investment
  • multifunctionality, simplicity and practicality
  • opportunity to load the mass into it's own dumper and deliver to unloading place
  • standard dimensions: may be moved by any transport, for example, tow truck with manipulator
  • possibility to use different attachments
  • can enter itself into the water
  • economy: for 10 hours of hard work just 7 litres of diesel needed
  • FED models has been improoved for many times since 1999
  • we supply 12 month warranty*

 

 

Technical data FED25

General data

Digging deapth - 2200 mm
Load capacity - 2500 kg 
Dumper volume - 1.32 m3 
Engine KIPOR (Yanmar type) 9HP
Loads 20-40 m3 per shift
Cycle of work into dumper - 13 sec

Basic equipment

Three parts of pontoon 
Mini excavator (rotation 360 ​​degrees) with bucket (volume 0.05 m3) 
Diesel engine KIPOR 9 HP with manual ignition
Dumper (volume 1.3 m3) 
2 anchors-tubes with hand winch

Additional equipment

Rake for floating water plants cleaning (1200x880 mm) 
Tires for earth movement (4 pcs.) 
Boat engine 
Operator's seat tilt 
Operator's cabin
Motor protection 
Heater of operator's cabin
Special order 

Working mode dimensions

  • length - 5000 mm
  • width - 2800 mm

Transportation dimensions

  • length - 5500 mm
  • width - 1900 mm
  • height - 1900 mm
  • weight - 2300 kg



 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Technical data FED50

General data

Digging deapth - 3100 mm
Load capacity 5000 kg 
Engine KIPOR (Yanmar type) 9HP
Dumper volume of 2 m3 
Cycle of work into dumper - 13 sec

Basic equipment

Three parts of pontoon 
Mini excavator(rotate 360 ​​degrees) with bucket (volume 0.05 m3) 
Diesel engine KIPOR 9 HP with manual ignition
Dumper (volume 2 m3) 
2 anchors-tubes with hand winch

Additional equipment

Rake for floating water plants cleaning (1200x880 mm) 
Boat engine 
Operator's seat tilt 
Operators cabin
Motor protection 
Heater of operator's cabin
Please suggest Yours

Working mode dimensions

  • length - 5500 mm
  • minimum width - 2470 mm
  • maximum width - 4400 mm

Transportation dimensions

  • length - 5950 mm
  • width - 2470 mm
  • height - 2080 mm
  • weight - 3500 kg



 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



©2014 BU Planeta
WEB: UAB "TVS projektai"